100A DC to DC Lithium Battery Converter

Quantity

Product Details

  • DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator (regenerative braking, Euro 5 and Euro 6 engines)
    • The Buck-Boost DC-DC Converter is a DC-DC Converter for charging a 12V or 24V service battery in vehicles with a smart alternator
    • The converter will charge the auxiliary battery with a pre-set charge voltage, eliminating high voltages (e.g. Mercedes: 15,4V) and low voltages
  • ‘Engine running’ detection system
    • Deep discharge of the vehicle's starting battery is avoided by a built-in ‘engine running’ detection system
    • Instead of this detection system, the converter can also be activated by means of a programmable input (D+, CAN bus or (+)15 connection)
  • Fully programmable
    • The converter can be fully programmed by means of a simple and user-friendly PC application. (USB type A male to USB type B male cable needed)
  • One product for 12V, 24V and 12/24V systems
  • The converter can be programmed to charge a 12V or a 24V auxiliary battery from either a 12V or a 24V alternator and starter battery
  • Charge current and input current limiter
    • The output current is determined by the following factors:
      • The maximum charge current setting
      • The maximum input current setting
      • The maximum operating temperature limit of the converter
  • Input status indication (LED)
    • Green: converter on
    • Yellow: input voltage below threshold, converter off
    • Red: over temperature, converter off
    • Blue, quick flash: engine running, converter will start after preset delay
    • Blue, slow flash: the converter is OFF and activation is blocked due to low input voltage
  • Output status indication (LED)
    • Green: converter off, battery voltage normal
    • Yellow: converter off, battery voltage low
    • Red: converter off, battery discharged or not connected
    • Purple: converter on.
100A DC to DC Lithium Battery Converter - Victron Energy